|
|
 |
 |
Geotechnical Services
Type:
Standard Penetration Test (SPT)
Dynamic Penetration Test (DPT)
Cone Penetration Test (CPT)
Features:
- Automatic Drop Hammer:
- 140 lbs weight, standard 30” stroke
- operates at 45 strokes per minute
- Can be used as a “casing” to prevent caving boreholes
- SPT:
- Drives standard 2” split spoon sampler
- Counting the number of blows (N) to drive the sampler 6”
- Conforms to ASTM Standards D1586-99
- DPT:
- Conforms to the international specifications for Dynamic Penetration Test-Super Heavy
- 2” diameter (51mm) x 5.75” (146.1 mm) long
- CPT:
- Cordless probes, providing a constant stream of real-time data while you are probing
- Information collected: soil resistance on the cone tip, resistance on the outer sides and pore pressure generated during the test
- Calculates: geotechnical parameters, (SPT) blow counts correlation, shear strength, relative density, friction angle and lateral stress
- Cone meets the ASTM D-5778
Benefits:
- Automatic Drop Hammer:
- All moving parts, including the 140 lb (64 kg) weight, are fully enclosed in a protective steel cabinet
- No cables or ropes needed for the operation
- Consistent results with no human error
Field Facts:
- Simultaneous Environmental and Geotechnical investigations
- Allows for versatility in hard access, rugged terrain, indoor and outdoor sites
|
|
|
